Getting started
Battery installation and charging
Battery installation
Install the battery, as shown below.
1.
Plug the battery connector securely into
the socket inside the handset battery
compartment. Insert the supplied battery
with the label THIS SIDE UP facing up,
as indicated.
CHARGE light
3.
Charge the handset by placing it face
forward in the telephone base or charger.
The CHARGE light is on when charging.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT183342). To order,
visit our website at
1 (866) 288-4268
In Canada, dial
www.telephones.att.com
2.
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Lift out the old battery and
disconnect it from the handset. Follow the
instructions mentioned above to install and
charge the new battery.
, or call
.
6
Align the cover flat against the
battery compartment, then slide
it upwards until it clicks into place.
1 (800) 222-3111
.