Set Date/Time - AT&T CL82115 Abridged User Manual

Telephone settings
Handset settings
�et date/time
The answering system announces the day and time of each
message prior to playing it. Before using the answering system,
set the date and time as follows. If you subscribe to caller ID
service, the day, month and time are set automatically with each
incoming call. The year must be set so that the day of the week
can be calculated from the caller ID information. You can turn
off the date and time settings of the caller ID service and set the
date and time manually.
1. When the handset is in idle mode, press MENU/
main menu.
2. Press q
CID
/�ELECT.
MENU
3. Press q
CID
/�ELECT, or enter the number using the dialing keys.
MENU
4. Press q
CID
or enter the number using the dialing keys.
5. Press q
CID
the dialing keys, then press
the time.
6. Press q
CID
or enter the number using the dialing keys.
7. Press q
CID
/�ELECT, or enter the number using the dialing keys.
MENU
8. Press q
CID
for �M. Press
NOTE: If the clock is not set when a message is recorded, the system announces,
"Time and day not set," before it plays the message.
to scroll to �et date/time and then press
or p
DIR
or p to select the month, then press
DIR
or p to select the day, then press
DIR
or p to select the year, or enter the number using
DIR
or p to select the hour, then press
DIR
or p to select the minute, then press
DIR
to select AM or �M, or press 2 for AM or 7
or p
DIR
/�ELECT to confirm.
MENU
/�ELECT to move on to set
MENU
11
to enter the
�ELECT
/�ELECT,
MENU
/�ELECT,
MENU