Call Screening; Number Of Rings - AT&T CRL32202 Complete User's Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be heard over
the telephone base speaker when they are being recorded. If you turn call
screening on, you hear the incoming message. While monitoring an incoming
message, you can answer the call by pressing PHONE/
on the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
/SELECT.
press
MENU
4. Press /SELECT to select >Call screening.
MENU
5. Press q or p
CID
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone. Press
NOTE: For more information on call screening, see pages 50-51.

Number of rings

You can set the answering system to answer an incoming call after two, three,
four, five or six rings. You can also select toll saver, which is explained below.
Unless you change it, the answering system answers an incoming call after
four rings.
To set the number of rings:
1. When the handset is in idle mode, press MENU/
menu.
2. Press q or p
CID
3. Press q or p
CID
4. Press q or p
CID
5. Press q or p
CID
>Toll saver.
• Toll saver - the answering system answers a call after two rings if
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges when calling from out of your local area.
6. Press /SELECT to save the setting. You hear a confirmation tone.
MENU
CANCEL to cancel.
Press
OFF/
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to choose >On or >Off.
DIR
CANCEL to cancel.
OFF/
to scroll to >Answering sys, then press
DIR
to scroll to >Ans sys setup, then press
DIR
to scroll to > # of rings, then press
DIR
to scroll and choose among >2, >3, >4, >5, >6 or
DIR
SELECT
SELECT
46
or /SPEA�ER SPEA�ER
FLASH
Answer ON/OFF
>Ans sys setup
>Call screening
# of rings
to enter the main
/SELECT.
MENU
/SELECT.
MENU
/SELECT.
MENU