Options With Requirements As Per En 54-2:1997/A1:2006 - Bosch FPC-500-2 Installation Manual

64 en | Technical Data
c) The power supply unit is a component of the FPC‑500 Fire
Panel and is supplied preinstalled. No additional installation
instructions are necessary.
1) Please refer to the information on environmental conditions
in this document.
2) The power supply unit is supplied preinstalled – assembly
instructions are not required.
3) For connection instructions, please refer to the FPC‑500
installation instructions.
d) The power supply unit is a component of the FPC‑500 Fire
Panel – there are no additional operating instructions.e) The
power supply unit is a component of the FPC‑500 Fire Panel –
no operation is required.f) Have maintenance and installation
work carried out regularly by trained, qualified personnel. Bosch
Sicherheitssysteme GmbH recommends carrying out a
functional and visual check at least once a year. Replace the
batteries on a regular basis. Please observe the appropriate
requirements stipulated by the local authorities etc.
6.5 Options with requirements as per EN
54‑2:1997/A1:2006
The FPC‑500 provides the following options with requirements
under EN 54‑2:1997/A1:2006
–
–
–
–
–
2014.06 | 7.0 | F.01U.172.980
Alarm counter
Test status
Output for activation of fire alarm devices
Transmission delay
Dependency of fire detection status on more than one
alarm signal
– Type A dependency
– Type B dependency
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH