Opening The Housing - Bosch FPC-500-2 Installation Manual

14 en | Installation
Remove the PC board if necessary. This is secured in the
housing with a grounding screw and snap-fit hook.
For cable entry on the upper side of the housing, use the pre-
formed round holes. For more stable insertion, M 20 x 1.5 screw
joints (PG13.5) can be used.
The cable entries on the rear are intended for direct cable entry
of flush mounted cables.
3.2.2

Opening the Housing

Remove the cover of the fire panel. Loosen both screws on the
underside of the housing, lift up the cover approx. 20° and
remove it.
2014.06 | 7.0 | F.01U.172.980
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH