System Configuration; Setting The Date/Time; Buzzer Beep - Bosch FPC-500-2 Installation Manual

34 en | System Configuration
Exiting submenus
RESET
4.1

System Configuration

In the System Config menu, you can specify basic settings for
your fire panel.
4.1.1

Setting the Date/Time

1
1
ACK
Repeat the steps to set the month, year, hour, and minute.
4.1.2

Buzzer Beep

1
2
1
2014.06 | 7.0 | F.01U.172.980
In the menu and in the submenus, you can jump to a
ESC
higher level or cancel the setting using the RESET
(ESC) key.
Hold the RESET (ESC) key down for 2 seconds to
jump to the uppermost level.
Press zone key 1. This takes you to the System
Config menu.
Press zone key 1.
You can now set the date and time.
To save the currently displayed value, press the ACK
key.
Press zone key 1. This takes you to the System
Config menu.
Press zone key 2.
This takes you to the Keypad Tone submenu.
Press zone keys 1 or 2:
2
– 1=On (default setting)
...
– 2 Off
Conventional Fire Panel
Bosch Sicherheitssysteme GmbH