Citizen CL-S700 User Manual page 41

7 Zebra Emulation
Top Menu Sub Menu
Page Setup Print Speed
Print Darkness
Darkness Adjust
[Darkness Adj]
Print Method
Continuous Media
Length
[Cont Media Len]
Vertical Position
[Vertical Pos]
Horizontal Shift
[Horizontal Shif]
Sensor Select
Media Sensor
Small Media
Adjustment
[Small Media Adj]
Small Media
Length
[Small Media Len]
Symbol Set
System Setup Sensor Monitor
Sensor Level
Paper End Level
Cover Open Sensor
[Cover Sensor]
Buzzer Select
Metric/Inch
[Metric/Inch Sel]
Max Media Length
[Max Media Len]
Settings Lock
Keyboard Lock
Media Power Up
CI Lock
Default Menu
7 IPS 2 to 10 IPS
12 00 to 30
00 -10 to 10
TT TT (Thermal Transfer) Selection of Thermal Transfer (ribbon) or
DT (Direct Thermal)
4.00 inch 0.25 to 32.00 inch
101.6 mm 6.4 to 812.8 mm
0.00 inch -1.00 to 1.00 inch
0.0 mm -25.4 to 25.4mm
0.00 inch -1.00 to 1.00 inch
0.0 mm -25.4 to 25.4mm
Rear Adj Sensor Rear Adj Sensor
Front Fixed Sen
See Through See Through
Reflect
None
Off On
Off
1.00 inch 0.25 to 1.00 inch
25.4 mm 6.4 to 25.4mm
PM 50 symbols
– –
1.4 V 0.0 V to 3.0 V
2.80 V 0.01 V to 3.00 V
Off On
Off
Exec/Err Exec/Err
All
Error
Key
None
Inch Inch
mm
10.00 inch 1.00 to 50.00 inch
254.0 mm 25.4 to 1270.0 mm
Off On
Off
Off On
Off
Off On
Off
Off On
Off
41
Printer Operation
Mode Settings
[Zebra Emulation]
Remarks
Printing speed setting.
Adjusting print darkness.
Fine adjustment of darkness commands.
Direct Thermal.
Setting media length of continuous media.
Lower level = during mm mode.
Adjusting printing start position.
Adjusting horizontal image position.
Selecting front fixed/rear adj. sensor.
Selecting media sensor.
Setting for small media.
Setting media length for small media.
Setting symbol set.
Displays level of sensor that is currently
selected.
Selects threshold of the sensor.
Sets the paper end level.
Sets the cover open sensor.
Setting buzzer sounding conditions.
Sets the units.
Sets the maximum media length.
Prevents a command changing the set value.
Prevents a change by a key operation.
Note: Hold down the Menu Key for at least 4
seconds to enter the Menu Setup Mode when
setting the "On" menu.
Selects whether or not to initiate media
measurement when the power in ON.
Activates/deactivates the CI command.