Citizen CL-S700 Quick Start Manual

1
Read This First !
Congratulations....
On your choice of a Citizen label printer.
Please take a moment to read this Quick Start Guide which will familiarise yourself with the
printer and its operation. The printer is a sophisticated but easy-to-use label printer featuring
simple media loading and quick connection together with a menu configuration systems
displayed on the LCD panel.
We will guide you through unpacking of the printer from its carton, connection to your computer
system and installation of the media including a quick self-test of the printer to ensure it is
working.
Safety
But if you have not done so already, please carefully read the safety instructions included at the
beginning of this Quick Start Guide and in more detail on the user manual included on the CD-
ROM. Failure to observe the safety precautions could cause serious injury or damage to both you
and your property.
Unpacking Your Printer
a. Carefully unpack your new printer and ensure all the items shown on the adjacent picture are
present in your printer's carton. Remember that the printer itself weighs about 13.3 kg (29.3
lb.) so ensure you lift the printer out of the box carefully with the assistance of another
person.
b. In some cases, your supplier or Citizen may have added extra items required for your particular
installation such as additional CD-ROM, cable or manuals. Instructions for each of these items
will be included within the individual packages.
c. If you have any questions, or if you find any of the items are missing, please initially refer back
to your supplier. Otherwise, contact details for Citizen's regional offices are shown on the
back page of this Quick Start Guide.
d. The printer is shipped with adhesive tape in place to hold the top cover closed. Simple remove
the tape and open the case by lifting the top cover upwards and back.
e. There is another strip of adhesive tape that must be removed which holds the mechanism
closed for shipping. Remove the tape and attached paper by carefully peeling from the case. A
further piece of packing paper is inside the mechanism. You can remove this when the head is
opened for the first time (as shown in section 3b).
2
Connection
Connection to Power
a. Check that the power switch to the printer is turned OFF.
b. Connect the connector of the power cord to the power cord inlet on the printer.
c. Insert the plug of the power cord in the AC outlet.
d. The power switch is located in the recess below the control panel on the front of the printer,
so that it is easy to access when the printer is installed.
Power Switch
AC Outlet
Power Cord Inlet
Use an AC outlet that accepts a three-pronged plug.
Caution
Otherwise, static electricity may be generated and there
will be danger of electric shock.
Basic Carton Contents
The following items are only present in the carton:
Ribbon Holder Sample Ribbon Paper Core
Head cleaner Media holder guide Media holder bar
Test label media Power cord
CD-ROM Quick-start Guide
Connection to a Computer
This product has three interfaces that can be used to receive printing data: a serial port
(RS232C), parallel port (IEEE1284), and a USB port (USB1.1). An optional internal Ethernet
(LAN) or Wireless LAN port can be added by your dealer. If the optional Ethernet or wireless
LAN port is used, the standard parallel and USB ports are removed from the printer, so the
parallel interface cannot be used.
With the exception of a wireless LAN connection, an interface cable is necessary to connect
the printer to a computer. To connect the cable, proceed as follows:
a. Turn OFF the power switches of both the printer and the computer.
b. Connect one end of the interface cable to the interface connector on the back of the
printer and secure it with locks or locking screws, where available.
c. Connect the other end of the interface cable to the interface connector on the computer
and secure it with locks or locking screws, where available.
Parallel Interface Cable
Serial Interface Cable
USB Interface Cable
des sur branchés soient récepteur le et l'ordinateur que ce à façon de différente courant de prise une dans
récepteur. le pour égard par part, autre
réception.
suivantes: mesures des plus ou l'une par l'interférence corriger de d'essayer l'utilisateur a demandé est il aussi,
hors et en mise la par provoquées télévision, ou radio réceptions les avec interférences les contre garantie de
résidentielle. installation une dans interférences telles de contre satisfaisante protection une fournir pour conçu
Canada. du Communications des ministère le par édicté radioélectrique brouillage le sur Réglement
la de numériques appareils aux applicables limites les dépassant électriques radio bruite de pas n'émet numérique
latélévision. de et radio la de réception la avec intérferences des provoquer de risque il fabricant,
strict accord en dire à c'est correctment, utilisé et installé pas s'iln'est et radiofréquences à l'énergie utilise et
Canadiens Utilisateurs des l'usage à EMI
equipment. the operate to authority user's the void could device this
the by approved expressly not modifications or changes Any computers. to device this connect to cables
help. for technician radio/TV experienced an
connected. is receiver the which to that from different circuit a on outlet an into equipment
receiver. and equipment the between
antenna. receiving the
measures: following the of more
the correct to try to encouraged is user the on, and off equipment the turning by determined be can which reception,
to interference cause does equipment this If installation. particular a in occur not will interference that guarantee
installation. residential a in interference such against protection reasonable provide to designed is equipment
of Department Canadian the of Regulations Interference Radio the in out set apparatus digital from emissions
A Class the exceed not does apparatus digital This reception. television and radio to interference cause may instructions,
the with accordance strict in is, that properly, used and installed not if and energy frequency radio uses and
Users Canadian for Statement
expense. own his at interference the correct to required be will user the case which in interference
is area residential a in equipment this of Operation communications. radio to interference harmful cause may
with accordance in used and installed not if and, energy frequency radio radiate can and uses, generates, equipment
commercial a in operated is equipment the when interference harmful against protection reasonable provide to
Rules. FCC the of 15 Part to pursuant device, digital A Class a for limits the with comply to found and tested
Users American for Statement
V. Bildscharb with compliance in workstation video a at use for intended
55db(A) than higher no output level acoustic a has and 7779 ISO EN under tested
EN61000-3-3 & EN61000-3-2 EN55024, (89/336/EEC)/EN55022,
(73/23/EEC)/EN60950-1
provisions: and criteria following the to conformity
Users European for Statement
all acknowledges Citizen manual. this in included are products and companies other of trademarks registered
manual. new a obtain to us contact manual, this in pages collated incorrectly or
manual. this within ambiguities or mistakes any are there
etc. inspections, repairs, failures, to due loss data
of loss or damage any for liable not are We lost. is power if lost be will data all Therefore, temporary. is printer
environment. inadequate and printer the of use erroneous user's by caused damage any
herein.
designated the than other supplies consumable and products optional of use the from resulting problems any
observed strictly
*
For Further Information . . .
For further information and more detailed instructions on the use of your new printer,
please refer to the complete user manual included on the CD-ROM accompanying
your printer. Alternatively, you can download the user manual and additional data
from Citizen's websites shown below.
The local Citizen Systems office can be contacted as follows:
For North and South America:
363 Van Ness Way, Suite 404
Torrance, CA 90501. USA
Tel: (310) 781-1460
Fax:(310) 781-9152
http://www.citizen-systems.com
For Europe, Middle East and Africa
Mettinger Strasse 11 Park House, 643-651 Staines Road
D-73728, Esslingen Feltham, Middlesex, TW14 8PA
Germany United Kingdom
Tel: +49 (0) 711 3906 420 Tel: +44 (0) 20 8893 1900
Fax:+49 (0) 711 3906 405 Fax: +44 (0) 20 8893 0080
http://www.citizen-europe.com
For Asia, including China and Japan:
6-1-12, Tanashi-cho, Nishi-Tokyo-shi
Tokyo, 188-8511. Japan
Tel: +81 (0) 42 468 4608
Fax:+81 (0) 42 468 4997
http://www.citizen-systems.co.jp
CITIZEN is a registered trade mark of CITIZEN HOLDINGS CO., Japan.
CITIZEN es una marca registrada de CITIZEN HOLDINGS CO., Japón.
Copyright © 2007 by CITIZEN SYSTEMS JAPAN CO., LTD.
Printed in China JN74905-00F
PMC-0705
différents. circuits
or omissions, errors, of regardless herein, contained information the of use the from
l'ordinateur Brancher ·
prohibited. strictly is consent prior without manual this of contents
l'ordinateur Installer ·
notice. prior without
de l'antenne Réorienter ·
outlet. the from cord power the unplug and immediately printer
l'équipment; de circuit
sharp-edged such use not Do malfunction. or problems cause may handling rough
pas a n'y il Cependant,
est équipment Cet
injury. cause could They cover. of corners
le dans prescrites A classe
appareil présent Le
causing possibly shut, slam could cover the open, partially only If way. the all opened
du instructions les avec
produit équipment Cet
it head, child's over pulled is bag the If children. from away kept be should bag This
Conformite de Etat
service. for need a indicating performance,
damaged. been has cabinet the or
of grantee
operation. normal to product the restore
shielded Use CAUTION:
require often will and damage in result may controls other of adjustment improper
are that controls those only Adjust followed. are instructions operating the when
or dealer the Consult ·
humidity. excessive or water
the Connect ·
product. the into spilled been have chemicals
separation the Increase ·
frayed.
relocate or Reorient ·
conditions: following the under personnel service qualified to servicing refer
or one by interference
near installed is outlet socket the that ensure Please power. mains disconnect to used
television or radio
no is there However,
on servicing all Refer risks. other or points voltage dangerous to you expose may Remove"
This Communications.
removing and Opening yourself. product this disassemble or service to attempt don't
noise radio for limits
product. the on kind any of liquid spill Never shock. electric
manufacturer's
out short or points voltage dangerous touch may they as slots cabinet through product
generates equipment This
outlet. 120V a for amperes 15 and outlet 220/240V
Compliance EMI
wall the into plugged products all of total the that sure make Also, rating. ampere cord
the into plugged products the on ratings ampere the of total the that sure make
harmful cause to likely
tension.
manual, instruction the
the on pull not Do on. walked be will cord the where product this locate not Do cord.
This environment.
plug. grounding-type the of purpose
designed are limits These
your replace to electrician your contact outlet, the into plug the insert to unable are
been has equipment This
grounding-type a into fit only will plug This pin. grounding third a having plug a plug,
Compliance FCC
company. power
of type the of sure not are you If label. marking the on indicated source power of type
not is device This
been has product This
is ventilation proper unless installation built-in a in placed be not should product
Directive EMC
placed be never should product This surface. similar other or rug sofa, bed, a on product
Directive Voltage Low
openings The openings. these cover or block not do overheating, from it protect to
shows marking CE
ventilation. for provided are bottom or back
Compliance
and product the to damage serious causing fall, may product The table. or stand cart,
trademarks.
or Trademarks 30.
oil, of lot a is there where or laboratory a in as such occur can reaction chemical a
missing are there If 29.
supply. mains the from disconnected is printer the when cleaning, for cloth
if us contact Please 28.
benzine, trichloroethylene, thinner, cleaners, aerosol or liquid use not Do cleaning. before
by caused profits
product. the
the in residing Data 27.
reference. later
for liable not are We 26.
contained products death. or injury serious situation, extreme in or, damage property
for liable not are We 25. observe to Failure carefully. instructions safety and operation important following the
be must which - Instructions
Thermal Transfer Barcode & Label Printer
CL-S700
Q S
UICK- TART
This Quick-Start Guide covers basic operation.
For detailed operating instructions, please see the User's Manual on the
supplied CD-ROM.
misprints.
resulting damage any for liable not are We 24.
the of transmission or transfer, Reproduction, 23.
changed be may manual this of contents The 22.
the stop printing, during occurs problem a If 21.
operation. for ballpoint a as tool
careless, A properly. panel control the Operate 20.
printing. during printer the open not Do 19.
the of careful be open, is cover the When 18.
injury.
is it cover, top the open you if sure Make 17.
suffocation. cause may
bag. packing plastic the store safely or Discard 16.
in change distinct a exhibits product the If f.
knocked or dropped been has product the If e.
to technician qualified a by work extensive
since instructions operating the by covered
normally operate not does product the If d.
or rain to exposed been has product the If c.
other or chemicals aerosol liquid, If b.
or damaged is plug or cord power the When a.
and outlet wall the from product this Unplug 15.
accessible. easily be shall and equipment the
be must equipment this on plug mains The 14.
personnel. service to compartments those
Not "Do marked are that covers those
manual, this in elsewhere explained as Except 13.
or fire of risk a in result could that parts
this into kind any of objects push Never 12.
for amperes 7.5 exceed not does outlet
extension the exceed not do cord extension
product, this with used is cord extension an If 1. 1
under them keep or cables data or cord power
power the on rest to anything allow not Do 10.
safety the defeat not Do outlet. obsolete
you If feature. safety a is This outlet. power
three-pronged a with equipped is product This 9.
local or dealer your consult available, power
the from operated be should product This 8.
provided.
This source. heat or radiator a over or near
the placing by blocked be never should
and product the of operation reliable ensure To 7.
the and cabinet the on openings and Slots 6.
it. around people
unstable an on product this place not Do 5.
particles. iron or salt dust,
where or water near product this use not Do 4.
damp a use Instead chemicals. similar or ketone
outlet wall the from product this Unplug 3.
on marked instructions and warnings all Follow 2.
for them save and instructions these of all Read 1.
or injury personal in result can precautions these
read please printer, your of operation safe the For
!
Safety
G
UIDE