Citizen CL-S700 User Manual page 40

2
Printer Operation
Mode Settings
[Datamax Emulation]
Top Menu
Global
configuration
[Global Config]
Note: To restore factory default settings, turn on printer power while pushing the MENU and PAUSE keys
simultaneously, then press the FEED key and the STOP key sequentially.
Sub Menu Default
Factory Default No
Hex Dump No
Serial Monitor –
Auto Calibration See Through
[Auto Cal]
Sensor Monitor See Through
– Config Set 1
Menu Remarks
Yes Initializes the set values of the configuration
No set to the state when the unit was shipped
from the factory.
Yes Sets the hex dump mode.
No
– Displays the state of the serial interface.
See Through Executes the calibration of the sensor.
Reflect
See Through Displays the level of the sensor.
Reflect
Config Set 1 Sets the Config Set.
Config Set 2
Config Set 3
40