Setting The Ribbon - Citizen CL-S700 User Manual

2
Printer Operation

Setting the Ribbon

The following kinds and sizes of ribbons can be used.
Types ...................................................... Inside wound and outside wound ribbon
Max. ribbon width ............................... 1 14.0 mm (4.50 inch)
Min. ribbon width ................................ 25.4 mm (1.00 inch)
Max. ribbon length .............................. 450.0 m (1,476 ft)
Max. roll diameter ............................... 86.5 mm (3.40 inch)
Inner diameter of the paper core .... 25.4 ± 0.25 mm (1.00 ± 0.01 inch)
Lead tape length .................................. Less than 80.0 mm
Setting method
1. Place the attached ribbon and paper core separately on one of
the two attached ribbon holders. Insert the two ribbon holders
into the ribbon and paper cores ensuring that they are pushed
in all the way.
Paper core
2. Install the unused ribbon and holder in to the rear ribbon drive
unit. The splines on the ribbon drive gear mechanism engage
with the end of the ribbon holder.
26
Ribbon holders
Ribbon
1
2