Table of Contents
Advertisement
Upgrading The Computer
Fan Cable & Cover
Make sure you recon-
nect the fan cable
before screwing down
the bay cover. Note the
information on replac-
ing the RAM & CPU
bay cover in
"Cover
6
Pins" on page 6 -
Figure 6 - 4
Removing the
Component Bay
Cover
(Model A
Computers)
6 - 8 Upgrading the Optical (CD/DVD) Device
Removing the Optical Device for Model A Computers
1.
Turn off the computer, and turn it over and remove the battery.
2.
Locate the component bay cover and remove screws
3.
Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
5
4.
Carefully disconnect the fan cable
14.
, and remove the cover
5
1
2
3
4
6
5
5
-
.
1
4
.
6
Advertisement
Table of Contents
