Table of Contents
Advertisement
Modules & Options
Figure 7 - 19
USIM Card Cover
Removal
Power Safety
Warning
Before you undertake any
installation
procedures,
7
make sure that you have
turned off the power, and
disconnected all peripher-
als and cables (including
telephone lines). It is advis-
able to also remove your
battery in order to prevent
accidentally turning the ma-
chine on.
Figure 7 - 20
Insert the USIM Card
7 - 30 3.75G/HSPA Module
1.
Turn off the computer, and turn it over and remove the battery (see page
2.
Locate the 3.75G USIM card cover and loosen screw
USIM card cover
.
2
3.
Insert the USIM card as you would into your mobile phone.
4.
Slide the SIMLOCK towards the hinge in order to release the lock and lift it up.
5.
Insert the USIM card as illustrated in
, and then remove the
1
1
(Figure 7 -
20) and close the SIMLOCK.
6 -
3).
2
Advertisement
Table of Contents
