Installing M912 Device Drivers; Touch Screen Calibration - Gigabyte M912 User Manual

1.15 Installing M912 Device Drivers

If your M912 Netbook Computer already has an operating system
installed, it is best to install all necessary device drivers in order for
he hardware to properly function.
Before installing drivers, check with your vendors to see if they have
already installed all the drivers with the operating system, if not,
please follow the steps below:
1. You can find the Utility Driver CD like the one shown below:
2. Put the CD into the CD R-W or DVD-RW (optional) Drive. An
Auto Run installation screen will appear.

1.16 Touch Screen Calibration

If your M912 Netbook Computer already has an operating system
installed, it is best to install all necessary device drivers in order for
he hardware to properly function.
The stylus pen together with the system touch-screen LCD display
provides you a touch-screen operation by emulating the industry
standard mouse left click. Below are the two conditions that you
need to calibrate your touch-screen.
• The first time Windows is installed and boot up. The active cursor
is shifted; not exactly the same position where the stylus pen tip is
tapped.
• Periodically when you find the active cursor is shifted away from
the screen position where the stylus pen tip is tapped.
To calibrate the touch-screen, go into Desktop Manu => PenMount
Control => Device => PenMount 6000 USB Resistive Digitizer =>
Configure => Calibrate => Standard Calibration. In the Setting
screen, select Calibrate. Then follow instruction to complete
calibration.
M912 Netbook USER'S MANUAL
11 11