3Rd Party Bluetooth Combo Driver Installation - Gigabyte W270BUQ User Manual

3rd Party Bluetooth Combo Driver Installation

Note this driver is required for the 3rd Party combo Bluetooth and WLAN module
only.
1. Before installing the driver make sure the Bluetooth module is powered
on (use Fn + F12 key combination), then insert the Device Drivers & Utili-
ties + User's Manual disc into the CD/DVD drive. If a Found New Hard-
ware window appears, click Cancel in all windows that appear, and then
proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 3.Install Combo BT Driver > Yes.
4. Choose the language you prefer and click OK.
5. Click Next.
6. Click the button to accept the license and click Next.
7. Click Next > (select if you want to create an icon to appear on the desktop)
Next > Install.
8. Click Finish.
9. The My Bluetooth icon
item will be installed in the Programs/All Programs menu.
10. See "Bluetooth Networking Setup" on page 7 - 21
Bluetooth networking.
will appear on the desktop and the Bluetooth
Bluetooth & Wireless LAN Combo Module 7 - 17
for information on
Modules & Options

High Speed Bluetooth
Data Transfer
The Combination Wire-
less LAN & V3.0 Blue-
tooth module supports
high speed (V3.0) data
transfer. However to
achieve such transfer
speeds, both devices
must support high
speed data transfer.
To obtain high speed
(V3.0) data transfer
make sure that both the
WLAN and Bluetooth
modules are powered
on.
Check your Bluetooth
compatible device's doc-
umentation to confirm it
supports high speed data
transfer.
7