Table of Contents
Advertisement
Creating a Profile
1.
Click Manual selection (button).
2.
Click the New.
3.
Enter a name you prefer for the profile.
4.
Enter the Access Point Name (APN).
5.
Enter the User Name and Password if required (some service providers may not
require this information and the fields may then be left blank).
6.
If your service provider requires IP address, DNS and Protocols to be entered,
click the appropriate tab and enter the supplied information (otherwise leave blank).
7.
Click Save to save the profile information.
8.
The profile will be stored under User defined in the Filter drop-down list.
Modules & Options
Deleting a Profile
To delete a profile click
to select Manual selec-
tion and select the pro-
file and click Delete.
Modifying a Profile
To modify a profile click
to select Manual selec-
tion and select the pro-
file
and
click
Change the settings as
required and then click
Save (note that only
user defined profiles
may be edited).
Figure 7 - 49
New Profile IP, DNS
& Protocols
3.75G/HSPA Module 7 - 59
7
Edit.
Advertisement
Table of Contents
