Installing T1028(M1028) Device Drivers; Touch Screen Calibration - Gigabyte Touch Note M1028 User Manual

1.15 Installing T1028(M1028) Device Drivers

If your T1028(M1028) Touch Note Computer already has an
operating system installed, it is best to install all necessary device
drivers in order for he hardware to properly function.
Before installing drivers, check with your vendors to see if they have
already installed all the drivers with the operating system, if not,
please follow the steps below:
1. You can find the Utility Driver CD like the one shown below:
2. Put the CD into the CD R-W or DVD-RW (optional) Drive. An
Auto Run installation screen will appear.
T1028(M1028) Touch Note USER'S MANUAL

1.16 Touch Screen Calibration

If your T1028(M1028) Touch Note Computer already has an
operating system installed, it is best to install all necessary device
drivers in order for he hardware to properly function.
The stylus pen together with the system touch-screen LCD display
provides you a touch-screen operation by emulating the industry
standard mouse left click. Below are the two conditions that you
need to calibrate your touch-screen.
• The first time Windows is installed and boot up. The active cursor
is shifted; not exactly the same position where the stylus pen tip is
tapped.
• Periodically when you find the active cursor is shifted away from
the screen position where the stylus pen tip is tapped.
To calibrate the touch-screen, go into Desktop Manu => eGalax
Touch =>Configure Utility=> Tool =>4 points Calibrate. In
the Setting screen, select Calibrate. Then follow instruction to
complete calibration.
11 11