Connection The Ac Adapter; Installing M1022 Device Drivers - Gigabyte M1022 User Manual

1. Turn off the computer.
2. Close the lid and flip the computer over.
3. Slide the battery latch. Continue to hold it until the battery is removed.
4. Make sure the replacement battery is properly oriented before inserting it into the battery
compartment.
Note: The battery can not be charged to 100% when remaining battery is no less than 95%. It
is based on the supplier's advice, and to extend charging frequency and battery life.
Maintenance of the AC Adapter
*Do not connect the adapter to any other device.
*Do not step on the power cord or place heavy objects on top of it. Carefully route the power
cord and keep cables away from all traffic.
*When unplugging the power cord, do not pull on the cord itself but on the plug instead.
*If you are using an extension cord, make sure that the devices plugged onto the cord do not
exceed its total capacity. Furthermore, the devices plugged into the electrical outlet shall not
exceed the fuse's total ampere rating.
*Please verify power voltage before connecting the electrical cord to the power outlet. If you
are uncertain of its power specification, please consult with your local vendors or power
company for more details.
1.14 Connecting the AC Adapter
The AC adapter converts AC power to DC power and reduces the voltage supplied to the
computer. It can automatically adjust to any voltage from 100 to 240 volts and outputs power at
12V, (12V, 3.0A for M1022), allowing you to use your M1022 Booktop computer in almost any
region.
CAUTION: Use only the AC adapter and the power cord we recommend. Using the wrong
adapter may damage your computer. We assume no responsibilities for damages arising from
misuse of AC adapters.
To properly connect the adapter, follow the steps as below:
1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC power port of your computer.
3. Connect the AC adapter power cord to an AC outlet.

1.15 Installing M1022 Device Drivers

If your M1022 Booktop Computer already has an operating system installed, it is best to install
all necessary device drivers in order for hardware to properly function.
Before installing drivers, check with your vendors to see if they have already installed all the