Start Up And Use - Hotpoint CH60IPK Instructions For Installation And Use Manual

60 cm electric cooker
Table of Contents

Advertisement

Start-up and use
! The first time you use your appliance, heat the empty
GB
oven with its door closed at its maximum temperature for
at least 2-3 hours. Ensure that the room is well ventilated
before switching the oven off and opening the oven
door. The appliance may emit a slightly unpleasant
odour caused by protective substances used during the
manufacturing process burning away.
! To make the setting process easier, keep the knob
in position: this will increase the scrolling speed of the
numbers on the display.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
Control panel lock
! The control panel can be locked during the cooking as
well as once the cooking has finished.
To lock the oven controls, press and hold the
for at least 2 seconds. A buzzer will sound and the
TEMPERATURE display shows the key symbol "O—n".
The
icon will light up to indicate lock activation.
To deactivate the lock, press and hold the
again for at least 2 seconds.
Setting the clock
! The clock can only be set when the oven is switched off.
If the oven is in standby mode, pressing the
once will display the current time setting. Press it again
to set the time.
After connection to the power supply network or after
a blackout, the
10 seconds.
To set the clock:
1. Press button
2. Turn the TIMER knob towards "+" and "-" to adjust the
hour value.
3. Once you have reached the correct hour value, press
the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that
the clock has not been set correctly.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
8
button on the display will flash for
.
Setting the minute minder
! The minute minder may still be set whether the oven is
switched on or off. It does not switch the oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
To set the minute minder proceed as follows:
1. Press button
2. Adjust the time as desired by turning the TIMER knob
towards "+" and "-".
3. Once you have reached the desired value, press the
button again.
The lit
symbol will remind you that the minute minder
is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
use the knob to set the time to 00:00. Press button
again.
button
The
icon will switch off to indicate that the minute
minder has been disabled.
Starting the oven
button
1. Switch the control panel on by pressing the
The appliance buzzer sounds three times (ascending)
and all buttons light up in sequence.
2. Select the TOP/GRILL or MAIN oven by pressing the
TOP OVEN/ GRILL
button
3. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;
.
button and
or MAIN OVEN
icon.
button.

Advertisement

Table of Contents
loading

Table of Contents