Lubricating Oil Specification - Perkins 1106 Series User Handbook Manual

Chapter 4 N40469

Lubricating oil specification

Use only good quality lubricating oil which is equivalent
to or above the minimum specification shown in the
table below.
Target oil specifications are:
Engine type Specification
1106D-E66TA API/CH4/CI4
Oil change period is 500 hrs. on CH4 oils and higher
specifications
Caution: The type of lubricating oil to be used may be
affected by the quality of the fuel which is available.
Always ensure that the correct viscosity grade of
lubricating oil is used for the ambient temperature
range in which the engine will run as shown in the
chart.
Page 20