Chapter 3
Preparations for an engine start
1.
Ensure that there is more than enough fuel in the
tank for the voyage.
2.
Ensure that the fuel supply control (if fitted) is in
the open position.
3.
Check that the seacock strainer is clean.
4.
Open the seacock.
5.
Check the amount of coolant in the header tank.
6.
Check the amount of lubricating oil in the sump,
and in the gearbox.
7.
Ensure that the control lever for the gearbox is in
the neutral position.
Several factors affect engine start, for example:
• The power of the batteries
• The performance of the starter motor
• The viscosity of the lubricating oil
• The installation of a cold start system
Page 14
N40469