Table of Contents
Advertisement
3. Installation
3.1 Installation and Adjustment
1.
Stick the mounting template on the position where you want to attach the camera.
2.
Drill the two holes on the template for screwing the camera with the supplied screws and
anchors, and the circle in the middle only if you want to wire the cables through the wall /
ceiling.
3.
Insert the supplied anchors into the holes.
4.
Remove the cover cap from the camera body.
5.
Attach the camera body to the correct position and then screw the camera body to the
wall / ceiling using the supplied two screws.
Screw
6.
Connect the camera to the 12V DC power source using the supplied power adapter pigtail
or a power adapter.
Cover Cap
Camera
body
3
EDH5102 1080p Mini Dome Camera
Advertisement
Table of Contents
