Tv Control Function; Selecting The Preset Bands; Selecting The Video Inputs; Selecting The Seek Mode - Kenwood KVT-920DVD Instruction Manual

TV Control Function

A
B
F
D

Selecting the Preset Bands

Touch [ TV ] to select the TV preset band.
Each time you touch [ TV ], the preset band
switches between the TV1 and TV2.
B

Selecting the Video Inputs

Each time you touch [ VD ], the video input
switches between the video 1 and video 2.
NOTE
No display for TV control icons when touch [ VD ].
E

Selecting the Seek Mode

You can choose from three seek modes: auto
seek, preset station seek, and manual seek.
Each time you touch [ SEEK ], the mode switches
as follows:
AUTO 1: Auto Seek Tuning
AUTO 2: Preset Station Seek Tuning
MANU: Manual Tuning
C

Selecting the Channels

Auto Seek Mode (AUTO1)
• Touch [ ¢ ] to seek for channels up the band.
• Touch [ 4 ] to seek for channels down the
band.
Preset station Seek Mode (AUTO2)
• Touch [ ¢ ] to move to the next preset station.
• Touch [ 4 ] to move to the last preset station .
Manual Seek Mode (MANU)
• Touch [ ¢ ] to increase the channel by one
step.
• Touch [ 4 ] to decrease the channel by one
step.
TV Control Screen
E
C
D
H
G
TV Area group
Preset Band
SNPS
AUTO 1/AUTO 2 /MANU indicator
G

Station Preset Memory

Store the channel of the station currently
being look to. You can then recall that station
with a single touch of a button.
1
Select the band/ station that you want to store.
2
Hold down preset station number [ P1 ] - [ P6 ]
on which you want to store the station, for two
seconds or more.
NOTE
You can store 6 stations in each of the TV1 and
TV2 preset bands.
A

Auto Memory Entry

You can automatically store all the receivable
channels in the band currently being look to,
and then recall them with the touch of a
button later. This function is especially useful
when you are travelling and do not know what
stations are available. Up to 6 stations can be
stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME ].
3 Touch [ 4 ] or [ ¢ ] to start auto memory
entry.
The preset station numbers [ 1 ] - [ 6 ] are
shown in order.
When all the stations on a certain band have
been stored in the preset memory, the auto
memory entry stops. The tuner then plays the
last station received.
G

Recalling a Preset Station

Touch the preset station number [ 1 ] - [ 6 ] for the
desired station. The number of the recalled station
is displayed.
F

Switching to the TV List Screen

Touch [ LIST ] to switch to the TV list screen (see
p.28).
Preset number
Channel number
27