Traffic Information Function; Seeking To A Different Traffic Information Station; Presetting The Volume For Traffic Information/News - Kenwood KVT-920DVD Instruction Manual

V
O
L
DISC/BAND
V.SEL
ATT
SOURCE
P
Q

Traffic Information Function

You can listen to traffic information. If you are
listening to discs, they will continue playing
until a traffic bulletin is broadcast.
Turning TI function On/Off
Press the [ TI ] button to turn the function on and off.
When the function is on, the TI indicator is
displayed.
If you are listening to a disc when a traffic bulletin
begins, playback will be interrupted. When the
bulletin ends or poor reception causes signal
losses , the disc will continue to play again.
R
Seeking to a Different Traffic
Information Station
Use the [ 4 ] / [ ¢ ] button to make an auto
seek of the TI stations in a certain band.
NOTE
• When you are listening to a disc, you cannot
change to another TI station.
• When the auto TP seek function is turned on and
reception starts to weaken, the tuner
automatically seeks stations with better
reception.
• If you are tuned to a station that is not a traffic
information station itself but which provides
<Enhanced Other Network> services, you can
still have traffic information received.
P
Presetting the Volume for Traffic
Information/News
Q
Preset the volume level to be used for traffic
information and news broadcasts.
1
Tune into the station for which you want to
set the volume.
2
Adjust the volume to the desired level.
3
Hold down the [ TI ] button for two seconds
or more.
The volume level that has now been stored.
Future traffic information/news broadcasts are
heard at the preset level.
NOTE
• The volume cannot be lowered by this
V
O
L
SCREEN
EJECT
TI
Q
R
function during tuner reception. The volume is
only set when it is louder than the listening
volume of the tuner.
• You can arrange only to listen to traffic
information or news bulletins with at preset
volume with the volume set at minimum.
31