Kenwood KVT-920DVD Instruction Manual page 61

Optical cable (Provided with the KDS-P900)
NOTE
Do not remove the protection caps of the unused BUS
terminals.
PREOUT
R FRONT REAR NON-FAD
L L L
POWER
R R R R
(10A)
(3A)
TT
C
(AccessoryD)
Receiver unit (rear side)
MZ-BUS TO
Connection cable (Provided with
the KDS-P900)
Protection cap
(Accessory A)
NOTE
If no connections are made, do not let the
cable come out from the tab.
Power control/ Motor antenna control cable
(Blue/White)
TEL mute cable (Brown)
External amplifier control cable (Pink / Black)
Ground cable (Black) - (To car chassis)
I/F 5L TO MONITOR TO ANTENNA TO
P.CONT OUT
ANT CONT
TEL MUTE
EXT.CONT
C
30R
(front side)
NAV.I/F TO
(rear side)
KDS-P900<5.1 Channels
Surround Processor >
(Optional)
Accessory O
Ignition cable (Red)
( 1A )
( 1A )
Ground cable (Black) - (To car chassis)
Connect either to the power control terminal when using
the optional power amplifier, or to the antenna control
terminal in the vehicle.
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
NOTE
To connect the KENWOOD navigation system, consult your
navigation manual.
To "EXT.AMP.CONT." terminal of the amplifier having the
external amp control function.
Green
DIGITAL IN
TV/DVD
MZ-BUS TO
A
C
61