TV Control Function
On Screen Control
A
B
D
Selecting the On Screen Control
Touch the D part.
If you make no button operation for 5 seconds, the on
screen control is automatically cancelled.
Selecting the Preset Band
<In Screen's button>
Touch the [BAND] button.
Each time the button is touched the preset band
switches between the TV1 and TV2.
<On TV Picture>
Touch the center upper part.
Each time the B part is touched the preset band
switches between the TV1 and TV2.
Seek Mode
Sets the seeking mode.
Touch the [SEEK] button.
Each time the button is touched the seeking mode
switches as shown below.
Seeking mode(display)
Auto seek ("AUTO1")
Preset station seek ("AUTO2")
stations
Manual ("MANU")
Selecting the Channel
<In Screen's button>
Touch the [4] or [¢] button.
<On TV Picture>
Touch the A or C part.
12 English
(During the KTC-V500N or KTC-V500P is connected)
C
Operation
Automatic search for
a station.
Search in order of the
in the Preset memory.
Normal manual
seeking control.
Preset
Control Screen
Station Preset Memory
Putting the station in the memory.
1 Select the band
Touch the [BAND] button.
2 Select the channel to put in the memory
Touch the [4] or [¢] button.
3 Put the channel in the memory
Touch the [P1] — [P8] button for at least 1 seconds.
On each band, 1 station can be put in the memory on
each [P1] — [P8] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1 Select the band for Auto Memory Entry
Touch the [BAND] button.
2 Open Auto Memory Entry
Touch the [AME] button.
3 Do Auto Memory Entry
Touch the [4] or [¢] button.
When 8 stations that can be received are put in the
memory Auto Memory Entry closes.
If you make no button operation for 10 seconds, the Auto
Memory Entry is automatically cancelled.
Recalling a Preset Station
1 Select the band
2 Call up the station
Touch the [P1] — [P8] button.
Exit the Control Screen
Touch the [OK] button.
If you make no button operation for 10 seconds, the control
screen is automatically cancelled.