Sign in today to find solutions:

Don't have an account? Sign up

Kenwood KVT-617DVD Instruction Manual

Kenwood monitor with dvd receiver models kvt-617dvd, kvt-647dvd instruction manual.

 
MONITOR WITH DVD RECEIVER
KVT-617DVD
KVT-647DVD
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KVT-617DVD/KVT-647DVD Serial number
US Residence Only
Register your Kenwood product at
www.kenwoodusa.com
© B64-3466-00/00 (KV/RV)
Register Online
Next page ->

Summary of Contents

  • Page 1

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KVT-617DVD/KVT-647DVD Serial number...

  • Page 2: Table Of Contents

    About Playing Dual Disc ... 7 Opening/Closing the Monitor and Power Switch ... 8 Removing/Attaching the Protection Panel .. 9 KVT-617DVD/647DVD Basic Operations . 10 Basic Operations of Remote Controller ... 12 About discs ... 15 Switching Screen Mode ... 16 Controlling during DVD Video, Video CD, JPEG or MPEG Playback ...

  • Page 3: Table Of Contents

    Source Select ... 58 Displaying the Control screen Displaying the Source Select screen Adjusting the Monitor Display Position and Quality ... 59 Displaying the Screen Control screen Displaying the Angle Control screen Setup Menu ... 60 Setup Menu ...60 Displaying the Control screen Displaying the Setup Menu screen Audio Set Up ...61 Display the Audio setup screen...

  • Page 4: Before Use

    • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly, press the Reset button to restore factory settings.

  • Page 5

    Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. Icons on the DVD discs Icon Indicates the region code where the disc can be played. Number of voice languages recorded with the audio function.

  • Page 6: Notes On Playing Mp3/wma/jpeg/mpeg

    Notes on Playing MP3/WMA/JPEG/MPEG This unit can play MP3 (MPEG1 Audio Layer 3)/ WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however, that the MP3/WMA/JPEG/MPEG recording media and formats acceptable are limited. When writing MP3/WMA/JPEG/MPEG, pay attention to the following restrictions. Acceptable media The MP3/WMA/JPEG/MPEG recording media acceptable to this unit are CD-ROM, CD-R, CD-RW, DVD-R/RW and DVD+R/ When using CD-RW, do full format not quick format to prevent...

  • Page 7: About Playing Dual Disc

    MP3/WMA/JPEG/MPEG playing order When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD/DVD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.

  • Page 8: Opening/closing The Monitor And Power Switch

    Opening/Closing the Monitor and Power Switch Open the monitor Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, •...

  • Page 9: Removing/attaching The Protection Panel

    Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Close the monitor first, then remove or attach the protection panel.

  • Page 10: Kvt-617dvd/647dvd Basic Operations

    KVT-617DVD/647DVD Basic Operations ■ When the monitor is open OPEN/CLOSE AUTO ■ When the monitor is closed OPEN/CLOSE AUTO 1 Play Disc [Disc insertion slot] A disc is played when you insert it. 2 Stop [7] key Stops playing a disc.

  • Page 11

    DVD/VCD TV */ Video R-CAM * Navigation * * Optional accessory You can also turn off the video display by pressing the key more than 1 second. When you press the key again, the previous video display comes back on. 7 Audio Source Selection/Power Supply [SRC] key Audio source selection changes in the following order...

  • Page 12: Basic Operations Of Remote Controller

    Basic Operations of Remote Controller : An operation during DVD playback : An operation during VCD playback : An operation during DVD, VCD, CD, MP3/WMA/JPEG/MPEG or MD playback DISC : An operation during TV source : An operation during FM/AM broadcasting source TUNER English...

  • Page 13

    1 Remote Control Mode selector switch Selects one of the following remote control modes. AUD: Tuner source or attached disc changer source DVD: Built-in DVD/VCD/CD/MP3/WMA/JPEG/MPEG player source TV source 2 [SRC] key Audio source changes each time you press the key. ] / [ ] key DISC...

  • Page 14

    ; [AUDIO] key (When 1 is set to "DVD") Switches an audio language. a [4] / [¢] key (When 1 is set to "DVD" or "AUD") DISC Selects a song. (When 1 is set to "TV" or "AUD") Selects a channel. (When 1 is set to "AUD") TUNER Selects a station.

  • Page 15: About Discs

    About discs Handling discs • Do not touch the recording surface of the disc. • CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage than a normal music CD. Use a CD-R/RW, DVD-R/RW, or DVD+R/RW after reading the caution items on the package etc.

  • Page 16: Switching Screen Mode

    Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. OPEN/CLOSE AUTO [MODE] key Full picture mode (FULL) Justify picture mode (JUST) Cinema picture mode (CINEMA) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) •...

  • Page 17

    English...

  • Page 18: Displaying The Dvd/vcd/jpeg/mpeg Playback, Screen, Dvd Disc Menu, Information Display

    Displays the Zoom Control buttons (page 23). w Information Display Button Area (page 23) • For DVD/VCD playback, DVD/VCD picture selection, or controller key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The information display is cleared automatically after approximately 5 seconds. Also, the information can be...

  • Page 19: Screen, Displaying The Easy Control Panel, Picture Control, Information Display

    JPEG/MPEG playback screen DVD MEDIA MODE: F U L L AV-OUT: Displaying the Easy Control Panel The Control Panel is displayed in a floating position of the DVD/VCD screen. Easy Control Panel T i t l e 1 C h a p 3 DVD VIDEO MODE: F U L L AV-OUT:...

  • Page 20: Displaying The Dvd/vcd Control Screen, Screen

    Displaying the DVD/VCD Control screen Plays a DVD/VCD using various functions. DVD/VCD Control screen DV D V I D E O N e x t N e x t 39 40 T i t l e 1 C h a p T 0 : 0 5 : 2 0 K E N W O O D T-REP...

  • Page 21

    Controlling during DVD Video, Video CD, JPEG or MPEG Playback English...

  • Page 22: Dvd Disc Menu, Screen

    You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. Highlight Highlight On DVD Menu DVD Menu 1. KENWOOD 1. KENWOOD 2. KENWOOD 2. KENWOOD 3. KENWOOD 3. KENWOOD 4. KENWOOD 4.

  • Page 23: Vcd Zoom Control, Screen, Picture Control, Information Display, Direct Search

    Controlling during DVD Video, Video CD, JPEG or MPEG Playback VCD Zoom Control Displays an enlarged VCD screen. Display the Zoom Control screen Zoom Control Button Area (page 18) ZoomCtrl Zoom 1 Changes the zoom ratio at 4 levels (2 times, 3 times, 4 times, or off ) each time you touch.

  • Page 24: Displaying The Easy Control Panel

    8 Selects a disc. (only when a disc is played back on the disc changer) • For CD/MP3/WMA/JPEG/MPEG/Disc Changer playback and receiver key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 25: Changer Control Screen, Set Disc Name

    Displaying the CD/MP3/WMA/ JPEG/ MPEG/Disc Changer Control screen You can play the CD/MP3/WMA/disc changer using various functions. CD Control screen DV D C D M e n u DISP T r a c k 4 P 2 : 0 9 K E N W O O D During CD playback 9 Adjusts the volume.

  • Page 26

    MP3/WMA/JPEG/MPEG Control screen DV D M E D I A M e n u DISP N e x t N e x t K E N W O O D FREP English During MP3/WMA/JPEG/MPEG play 13:50 l Calls the MP3/WMA/JPEG/MPEG Menu. / Ejects a disc.

  • Page 27: Set Disc Name

    Disc changer/CD player Control screen C D C H M e n u D i s c D i s c DISP SCRL N e x t N e x t DREP MRDM CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control During play by the disc changer/CD player 13:50 U Calls the Disc Changer/ CD player Menu.

  • Page 28: Changer Menu Screen, Changer Control Screen

    Displaying the CD/MP3/WMA/JPEG/ MPEG/Disc Changer Menu screen You can select menu options using various functions. Me n u CD Menu screen D V D C D Name Set English Selects options from various function menus. Returns to the CD/MP3/WMA/JPEG/MPEG/Disc Changer Control screen. •...

  • Page 29

    Set Disc Name Names a CD. Play a CD you wish to name Call the CD/Disc Changer Menu Me n u Select the Name Set mode Name Set • The Name Set depending on the disc you are playing. Enter a name For character entry details, see <Character Entry>...

  • Page 30: Disc Select (during Play By Disc Changer

    ID3/WMA TAG Display (during MP3/ WMA play) The ID3/WMA TAG information of MP3/WMA file is listed. Call the MP3/WMA/JPEG/MPEG Menu Me n u Display the ID3/WMA TAG I n fo r m a t i o n DVD MEDIA A L B U M : T i t l e : A r t i s t : A l bu m :...

  • Page 31: Direct Search

    Direct Search Searches for a disc or a track when its number is entered. During play on the built-in disc player Select the Direct Search mode The following items can be searched directly each time it is pressed. CD: Track number, Total play time MP3/WMA/JPEG/MPEG: Folder, File Enter a track number —...

  • Page 32: Tuner Control, Displaying The Easy Control Panel, Displaying The Tuner Control Screen, Seek Mode

    4 Tunes in a station. 5 Switches the Seek mode. (see page 34 for the <Seek Mode>) • For receiver key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 33: Displaying The Tuner Menu Screen, Seek Mode, Auto Memory, Manual Memory, Preset Select, Radio Text

    Displaying the Tuner Menu screen You can select menu options using various functions. Me n u Tuner Menu screen T U N E R Preset Select Name Set PTY Search Radio Text a When the stations on memory. For memory on broadcasting stations, see <Auto Memory>...

  • Page 34: Seek Mode, Auto Memory, Manual Memory, 2 | English

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 35: Preset Select, Set Station Name, 2 | English

    Preset Select Lists and tunes in stations in memory one after other. Call the Tuner Menu Me n u Call the Preset Select Menu Preset Select T U N E R FM1 1) 87.5 MHz FM1 2) 90.1 MHz DISP FM1 3) 98.1 MHz FM1 4) 106.1 MHz FM1 5) 108.0 MHz...

  • Page 36: Traffic Information, Direct Search, 2 | English

    Direct Search Tunes in a station when its frequency is entered. Select a band Select the Direct Search mode Enter frequency — When you enter frequency, signal reception starts. Example: When you receive FM 92.1 MHz Example: When you receive AM 810 kHz •...

  • Page 37: Search For Program Type, Radio Text, 2 | English

    Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast.) Call the Tuner Menu Me n u Call the PTY Search Menu PTY Search T U N E R All Speech All Music News Current Affairs...

  • Page 38: Tv/ Video Control, Displaying The Tv Picture Screen, Displaying The Easy Control Panel, Seek Mode

    Switches to TV1, TV2, or VIDEO. 7 Information Display Button Area • For TV picture selection and receiver key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). 2 c h • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated (page 70).

  • Page 39: Displaying The Tv Control Screen, Displaying The Tv Menu Screen, Seek Mode, Auto Memory

    Displaying the TV Control screen You can tune in a TV station using various functions. TV Control screen VIDEO – – SEEK N e x t N e x t T V 1 P r e s e t 1 AUTO1 Displaying the TV Menu screen You can select menu options using various...

  • Page 40: Auto Memory, Seek Mode, Manual Memory, Preset Select

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 41: Set Station Name, Direct Search

    Set Station Name Names a station. Select a station you wish to name Call the TV Menu (Page 39 t) Me n u Select the Name Set mode Name Set Enter a name For character entry details, see <Character Entry> (page 57).

  • Page 42: Displaying The Sirius Tuner Control Screen, Displaying The Easy Control Panel

    SEEK 1: Tunes channels one after the other. SEEK 2: Selects channels in memory one after the other. • For system key operations, see <KVT-617DVD/647DVD Basic Operations> (page10). • The Easy Control Panel is hidden when you touch a central area of the monitor.

  • Page 43: Displaying The Sirius Tuner Menu, Channel Search, Channel Memory

    Displaying the SIRIUS Tuner Menu You can select menu options using various functions. Me n u SIRIUS Tuner Menu screen S I R I U S Channel Search 10key Direct SIRIUS Information i When recall channel on memory. For memory of channel stations, see <Channel Memory>...

  • Page 44: Channel Search, Channel Memory

    Channel Search The categories and channels are listed for your channel selection. Call the SIRIUS Tuner Menu Me n u Start Channel Searching Channel Search The category list appears. Category Selection screen S I R I U S CAT.Pop CAT.Rock CAT.Countr y CAT.Jazz&Standard CAT.Clasical...

  • Page 45: Direct Channel Search, Channel Search, Information Display

    Direct Channel Search A channel is tuned when you enter its number. Call the SIRIUS Tuner Menu Me n u Display the Direct Search screen 10key Direct Direct Search screen S I R I U S 9 9 9 c h J a z z E n C l a v e C a n c e l 1 Enters a channel number.

  • Page 46: Displaying The Hd Radio Control Screen, Displaying The Easy Control Panel, Seek Mode, Auto Memory

    4 Tunes in a station. 5 Switches the Seek mode. (see page 48 for the <Seek Mode>) • For receiver key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The Easy Control Panel display is hidden when you touch a central area of the monitor.

  • Page 47: Displaying The Hd Radio Menu, Seek Mode, Auto Memory, Manual Memory, Receive Mode

    Displaying the HD Radio Menu screen You can select menu options using various functions. Me n u HD Radio Menu screen HD RADIO Receive Mode Title o When recall the stations on memory. For memory of broadcasting stations, see <Auto Memory>...

  • Page 48: Manual Memory, Seek Mode, Auto Memory

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK The mode is switched in following order each time you touch the button. Tunes in a station with good AUTO1 reception automatically. Tunes in stations in memory one AUTO2 after another.

  • Page 49: Receive Mode, Title Display

    Receive Mode The digital or analog program is selected and received. Call the HD Radio Menu Me n u Call the Receive mode Menu Receive Mode H D R A D I O Receive Mode A u t o 1 Receive mode Display. 2 Switches the Receive mode.

  • Page 50: Displaying The Dab Tuner Control Screen, Displaying The Easy Control Panel, Seek Mode

    5 Selects the Ensemble. 6 Switches the Seek mode. (see page 52 for the <Seek Mode>) • For system key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The Easy Control Panel display is hidden when you touch a central area of the monitor.

  • Page 51: Displaying The Dab Tuner Menu Screen, Dab Information

    Displaying the DAB Tuner Menu screen You can select menu options using various functions. Me n u DAB Tuner Menu screen D A B Ser vice Select Languag e Filter PTY Search DAB Information s Selects option from various function menus. d Returns to the DAB Tuner Control screen.

  • Page 52: Auto Ensemble Memory, Seek Mode, Service Preset Memory

    Seek Mode Sets a station selection. SEEK is not shown, touch SEEK The mode is switched in following order each time you touch the button. Tunes in a ensemble with good AUTO1 reception automatically. Tunes in service in memory one AUTO2 after another.

  • Page 53: Service Select, Language Filter

    Service Select The service list of the currently receiving ensemble is displayed for your selection. Call the DAB Tuner Menu Me n u Call the Service Select Menu Ser vice Select D A B Ser vice Name Ser vice Name Ser vice Name Ser vice Name Ser vice Name...

  • Page 54

    Search for Program Type The services are received when you set its program type. Call the DAB Tuner Menu Me n u Call the PTY Search Menu PTY Search D A B N e w s SRCH LANG 2 2 0 . 0 9 4 M H z 1 Selects a program type.

  • Page 55: Dab Information, Dab Announcement

    DAB Information The DAB information is displayed. Call the DAB Tuner Menu Me n u Display the DAB Information screen DAB Information T U N E R Service Label: Ensemble Label: Component Label: 2 2 0 . 0 9 4 M H z 1 Displays the DAB information (such as Service label, Ensemble label, Component label, Audio quality, Region label, and Dynamic label).

  • Page 56: Weather Band Tuner Control, Displaying The Easy Control Panel

    1 Adjusts the volume. 2 Switches the source. 3 Tunes in a station. • For system key operations, see <KVT-617DVD/647DVD Basic Operations> (page 10). • The Easy Control Panel display is hidden when you touch a central area of the monitor.

  • Page 57: Character Entry

    Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen K E N W O O D S p a c e 1 Shifts the cursor.

  • Page 58: Source Select, Displaying The Control Screen, Displaying The Source Select Screen

    Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen Press this key several times unit the Control screen appears. Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p...

  • Page 59: Adjusting The Monitor Display Position And Quality, Displaying The Screen Control Screen

    Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen You can adjust the picture quality using the following keys. Screen Control screen Displaying the Angle Control screen You can set the monitor position and open/close speed.

  • Page 60: Setup Menu, Setup Menu, Displaying The Control Screen, Displaying The Setup Menu Screen

    Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen Press this key several times until the Control screen appears. Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p T 0 : 0 5 : 2 0...

  • Page 61: Audio Set Up

    Audio Set Up You can setup a speaker network, etc. Displaying the Audio Set Up screen Speaker Setup screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (page 78) 4 Calls the Setup Menu.

  • Page 62: Crossover Network Setup

    Crossover Network Setup You can set a crossover frequency of speakers. X'Over Setup screen X ' O v e r HPF Front FREQ 2 2 0 H z HPF Rear FREQ 1 8 0 H z LPF SUB FREQ 1 2 0 H z S U B P h a s e 1 Sets a Front High Pass Filter frequency.

  • Page 63: Dvd Setup, Displaying The Dvd Setup 1 Screen, Language Setup

    Before Use DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 screen DVD SETUP 1 screen Menu LANG S u b t i t l e LANG Au d i o LANG Dynam i c R a n g e N o r m a l DVD SETUP 1 1 Returns to the Control screen of the previous...

  • Page 64: Displaying The Dvd Setup 2 Screen, Displaying The Dvd Setup 3 Screen, Parental Level Setup

    Displaying the DVD SETUP 2 screen DVD SETUP 2 screen Angle Mark S c r e e n R a t i o 1 6 : 9 Pa r e n t a l L e v e l O f f DVD SETUP 2 Displaying the DVD SETUP 3 screen DVD SETUP 3 screen...

  • Page 65: Displaying The Dvd Setup 1 Screen, Language Setup

    Language Setup Selects a language you use for the speech and menus. Display the Language Setup screen See <Displaying the DVD SETUP 1 screen> (page 63) and select a language you wish to use. A u d i o LANG C l e a r C a n c e l 1 Enters a language code.

  • Page 66: Parental Level Setup

    Parental Level Setup Sets a parental level. Display the Parental Level code number screen (Page 64 q) S e t P a r e n t a l P a s s * * * * C l e a r C a n c e l 1 Enters a code number.

  • Page 67: System Setup

    System Setup You can set up the system parameters. Displaying the System Set Up 1 screen System Set Up 1 screen B e e p S c ro l l A u t o Remote Sensor System Set Up 1 Displaying the System Set Up 2 screen System Set Up 2 screen...

  • Page 68: Av Interface, Displaying The Av I/f 1 Screen

    3 Calls the Sound Effects Menu. (page 78) 4 Calls the Setup Menu. 5 Selects a navigation system connection. ( "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable. "AV-IN1": Allows a third-party navigation system to connect via the AV INPUT1 port.

  • Page 69: Displaying The Av I/f 2 Screen, Displaying The Av I/f 3 Screen

    Before Use Displaying the AV I/F 2 screen AV I/F 2 screen D V D Displaying the AV I/F 3 screen AV I/F 3 screen F - L e f t p Sets a method to switch to the rear view camera video display.

  • Page 70: User Interface, Displaying The User I/f 1 Screen, Displaying The User I/f 2 Screen

    Control during DVD Video or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User I/F 1 screen Displaying the User I/F 2 screen User I/F 2 screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 71: Touch Panel Adjustment, Clock

    Before Use Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch Panel Adjust screen Touch Touch touch to display it. Touch Adjust Me n u T o u c h 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.

  • Page 72: Security Code Setup

    Before Use Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice.

  • Page 73

    Before Use If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code — You must enter the same security code as that you have entered in Step 3 above. Enter the security code E n t e r Now, you can use your Receiver.

  • Page 74: Set Up Memory

    Before Use Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored. Display the Set Up Memory screen Set Up Memor y Set Up Memor y...

  • Page 75: Displaying The Sirius Set Up Screen

    Before Use SIRIUS Setup <North American sales only> You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only) Displaying the SIRIUS Set Up screen SIRIUS Set Up SIRIUS Set Up screen S I R I U S I D Me n u 1 2 3 4 5 6 7 8 9 0 1 2 S I R I U S S e t U p...

  • Page 76: Displaying The Dab Set Up Screen, Announcement Selection

    DAB Set Up You can set the DAB reception. (only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen DAB Set Up DAB Set Up screen D A B P r i o r i t y Me n u D R C R e g i o n a l I N T...

  • Page 77: Announcement Selection

    Announcement Selection You can set various announcement reception parameters. Displays the Announcement Selection screen (Page 76 9) S e t A n n o u n c e m e n t Tr a f f i c N e w s Tr a n s p o r t N e w s Wa r n i n g N e w s...

  • Page 78: Sound Effects Menu, Sound Effects Menu, Displaying The Control Screen

    Sound Effects Menu Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen Control screen DV D V I D E O N e x t N e x t T i t l e 1 C h a p T 0 : 0 5 : 2 0 K E N W O O D...

  • Page 79: Audio Control, Displaying The Audio Control 1 Screen, Displaying The Audio Control 2 Screen

    Audio Control You can adjust the front and rear and right and left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen Displaying the Audio Control 2 screen Audio Control 2 screen Me n u BMS AMP Bass + 6 d B BMS AMP FREQ Normal...

  • Page 80: Equalizer, Displaying The Equalizer Screen, Tone Curve Setup

    Control during DVD Video or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen E q u a l i z e r Equalizer screen Me n u System Q N a t u r a l S y s t e m Q - E X Equalizer English...

  • Page 81: Tone Curve Setup

    Before Use Tone curve setup You can set a Tone curve. Display the Tone setup screen (Page 80 7) T o n e Tone setup screen 1 Adjusts the volume. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed. 4 Treble adjustment items are displayed.

  • Page 82: Zone Control, Displaying The Zone Control Screen

    Zone Control You can set the front and rear audio source. Displaying the Zone Control screen Zone Control screen English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 60) 4 Calls the Sound Effects Menu.

  • Page 83: Muting Audio Volume Upon Reception Of Phone Call, Muting Audio Volume Upon Reception Of Phone

    Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and the system is paused. Phone Call ("CALL") screen C A L L If you want to continue to listen to the audio...

  • Page 84: Glossary

    Glossary DVD: Digital Versatile Disc A type of disc which contains recording of audio/ video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of mov- ing images.

  • Page 85: Troubleshooting Guide

    Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misopera- tion or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn on. ✔...

  • Page 86

    The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car. Check the speaker wiring. ✔ The speakers are not wired correctly. Reconnect the speaker wires so that each output terminal is connected to a different speaker.

  • Page 87

    The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. Clean the CD. ✔ The CD is upside-down. Load the CD with the labeled side up. ✔ The disc is loaded in a different slot from that specified.

  • Page 88

    Mecha Error The disc player is malfunctioning. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error The unplayable discs is inserted. Read Error The disc is upside-down.

  • Page 89: Specifications

    Specifications Specifications subject to change without notice. Monitor section Picture size : 6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement Back lighting...

  • Page 90

    Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: