Step 2: Connecting The Audio Cords - Sony DVP-NC600 Operating Instructions Manual

Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select one of the following connections, m through m.
Connection
a (page 21)
m (page
22)
m
(page
22)
m (page 24)
Components to be connected
l
TV (stereo)
l
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
l
2 speakers
(front L and R)
l
MD deck/DAT deck
l
AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
l
3 speakers
(front L and R, and rear (monaural))
l
6 speakers
m (page
26)
(front L and R, center, rear L and R, subwoofer)
l
AV amplifier (receiver) having a Dolby Digital or DTS** decoder, and a digital
input jack
l
6 speakers
(front L and R, center, rear L and R, subwoofer)
* Manufactured under license from Dolby Laboratories. "Dolby," " Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. 0 1992-1997 Dolby Laboratories. All rights
reserved.
**"DTS" is a registered trademark of Digital Theater Systems, Inc.
20