Maintenance - Reebok PowerBike REM-11200 User Manual

Reebok Fitness RB Bike Series – PowerBike

Maintenance

Inspect and tighten all parts of the PowerBike regularly. Replace any worn parts immediately.
For continued smooth operation of the PowerBike, the Front and Rear Stabilisers should be
kept clean. Using a soft cloth and mild detergent, clean any dust and residue that may build
up where the wheels move on the stabilisers. Other components of the PowerBike can also
be cleaned in this manner.
IMPORTANT: Never use abrasives or solvents to clean the PowerBike. To prevent
damage to the computer, keep liquids away and keep it out of direct sunlight.
Troubleshooting
BATTERY REPLACEMENT
Replace the batteries if:
•
the screen goes blank
•
the battery icon appears in lower screen
•
no resistance change is felt
CHECK WIRE CONNECTIONS
Check the connections if:
•
the screen goes blank
•
no resistance is felt
•
no resistance change is felt
•
the resistance is very high
If you have any other problems please call Technical Support on the following
www.reebokfitness.co.uk
UK Contact Number
number (UK residents only):
0870 330 0024
39
Issue 1 – August 2004