Reebok PowerBike REM-11200 User Manual page 16

Reebok Fitness RB Bike Series – PowerBike
3: Pedal Assembly:
Thread the Right Pedal (75) (there is an "R" stamped on the pedal for identification) into the
Right Crank (4). Finger tighten only and then fully tighten with the Spanner (102).
Place the Right Pedal Strap onto the pedal (this is identified with an "R" on the upper surface
of the strap). Attach the end of the strap with the two segments cut out first. Then attach the
other side once the desired length has been selected. Repeat the process for the Left Pedal
(88).
www.reebokfitness.co.uk
16
Issue 1 – August 2004