Reebok PowerBike REM-11200 User Manual page 15

Reebok Fitness RB Bike Series – PowerBike
2: Rear Stabiliser Assembly:
Fasten the Rear Stabiliser (76) to the Base Frame (31) using 2 x Bolt (71), 2 x Washer (72)
and 2 x Spring Washer. Tighten with Allen Key (101).
Note: To aid the assembly process, it may help to place a piece of the Styrofoam packaging
under the Base Frame (31).
The Rear Stabiliser (76) has the Level Adjusters (70) pre-assembled. If your PowerBike is
not steady you will need to adjust these in order to stabilise the unit. To adjust tip the product
to one side and screw the adjuster out. It may help to have someone hold the bike for you
when carrying out this procedure.
www.reebokfitness.co.uk
15
Issue 1 – August 2004