Reebok PowerBike REM-11200 User Manual page 24

Reebok Fitness RB Bike Series – PowerBike
Place the Handlebar Adjustment Cover – upper section (53) over the Handlebar and on top of
the lower section, secure both sections with 4 x Screws (55) using Screwdriver (103).
Note: to do this the Handlebar Adjustment Knob must only be inserted a couple of turns. If it
is fully tightened this will prevent you from assembling the Handlebar Covers.
Now fully tighten Adjustment Knob (46). To alter the position of the Handlebars undo the
Adjustment Knob (46), select the desired position and then tighten it again.
www.reebokfitness.co.uk
24
Issue 1 – August 2004