Activating The Terminal - Hughes HT1000 Installation Manual

Activating the terminal

The next step in the process is activating the terminal. The terminal activation
process associates the SAN with the ESN.
1. Make sure your laptop computer is connected to the modem's LAN port.
2. Click the HT1000 Registration tab at the top of the screen.
3. The installation home page appears, showing the
Terminal Activation
ready to be activated (after commissioning is complete). The link is not present
after activation is completed.
4. Click the
Terminal Activation
Link
Figure 29: Terminal Activation link
If you see a Page not found error, check the following:
• Make sure the modem is powered on.
• Check the Ethernet connection. The orange LED on the LAN port should blink if
you send data from the computer to the modem.
• Make sure a router is not connected between the modem and the PC.
• Before proceeding to the next step, make sure at least 5 minutes have passed
since the Terminal Initialization Sequence. This allows the modem to complete
its final configuration.
5. The HughesNet Activation screen appears as shown in Figure 30.
link appears only on a new installation when the modem is
link as shown in Figure 29.
Chapter 7 • Activating the terminal
Chapter 7
link. The
Terminal Activation
1039110-0001 Revision A
49