Activation procedure
Chapter 8 • Activating the HughesNet service
56
1039110-0001 Revision A
Note: If the customer wants to connect the modem to a router, do not connect the
until activation is complete.
Figure 36: Connecting Ethernet cable to customer's computer
The customer activates the HughesNet service. A summary of the activation process
is provided here, so that you will know what the customer should expect. This
summary description is not a complete description of the activation process, and it
does not show all the screens the customer will see during service activation. The
screens that follow give you an idea of what to expect during service activation.
Ask the customer to do the following:
1. Navigate to the System Control Center home page.
2. Click the
Service Activation
link as shown in Figure 35 on page 55.