Table of Contents
Advertisement
Link
Figure 35: System Control Center home page
4. Notice you have a
at this time. Before you activate the customer's service, you must connect the
customer's computer to the satellite modem.
Service activation prerequisites
Before proceeding, make sure the modem and the customer's computer are ready
for service activation. Prerequisites for service activation are:
• The modem must be commissioned.
• The modem must be connected to the customer's computer (next step).
• The customer's computer must be configured for DHCP.
Connecting the satellite modem to the customer's computer
1. Use an Ethernet cable to connect the satellite modem to the customer's
computer as shown in Figure 36.
a. Disconnect the Ethernet cable from your laptop computer. The Ethernet cable
is already connected to the LAN port on the rear panel of the satellite modem.
b. Connect the Ethernet cable to the LAN port on the PC or other device as
shown in Figure 36.
Service Activation
link on the side panel. Do not click this link
Chapter 8 • Activating the HughesNet service
1039110-0001 Revision A
55
Hide quick links:
Advertisement
Table of Contents
