Burners; Thermostat - Vulcan-Hart EF3 ML-52099 Service Manual

BURNERS

WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Remove heat shield as outlined under
Cover and Panels. (Optional)
2. Loosen the two mounting bolts at the top
of each burner (Figure 3).
Figure 3
3. Push burner up while pulling the bottom
of the burner forward to clear the burner
nozzle (Figure 4).
4. Reverse the procedure to install.

THERMOSTAT

WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Drain shortening from fry tank.
2. Remove heat shield as outlined under
Covers and Panels.
3. Remove left burner as outlined under
Burners.
4. Remove thermostat knob by pulling knob
off thermostat shaft.
— 5 —
EF SERIES GAS FRYERS
Figure 4
F35641 (02-05)