Installing Rear Log; Installing Top Right Log; Installing Middle Log - Superior VD1824NR Operation Instructions Manual

LVD18-CH AND LVD24-CH
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater.
1. Place the rear log onto base. Notches
in the back of the log must seat over
the pins on base as shown in Figure 24.
Make sure the rear log is pushed back
as far as it will go.
Pin for Hole
in Bottom of
Log
Figure 24 - Installing Rear Log
2. Place the middle log on base. Holes in
bottom of log must seat over pins on
base as shown in Figure 25.
Pin for
Hole in
Bottom of
Log
Figure 25 - Installing Middle Log
18
INSTALLATION
Continued
Rear Log
Burner
Middle Log
Burner
www.SuperiorFireplaces.US.com
3. Place the front log onto grate as shown
in Figure 26.
Grate
Figure 26 - Installing Front Log
4. Place the top right log onto the rear,
middle and front logs as shown in Figure
27. The rear, middle and front logs has
notches for the top right log to set into.
You may have to move the front log from
left to right to get it to line up with the
top right log.
Top Right Log
Rear Log
Middle
Log
Front Log
Figure 27 - Installing Top Right Log
Middle Log
Log
Notch
126839-01A