Arpa Target Data - Furuno 1835 Operator's Manual

6. Use the Cursorpad (
7. Use the Cursorpad (
8. Press the MENU key to close the menu.
3.8

ARPA Target Data

You can show the data for a tracked ARPA target in the data box at the bottom of the
screen. To display ARPA target data, the menu item [Display] on the [ARPA] menu
must be set for [On] and the menu item [Data Box] on the [Display] menu must be set
for [Target] or [All].
1. Use the Cursorpad to put the cursor on an ARPA target.
2. Press the ENTER key to show the data of the target.
Bearing, range, course, speed
CPA, TCPA
The symbol for the selected ARPA target is enlarged double to distinguish from other
symbols.
To remove the data of a target from a data box, put the cursor on its target symbol and
press the CANCEL/HL OFF key.
www.busse-yachtshop.de | info@busse-yachtshop.de
or ) to select [History Interval] and press the ENTER key.
History Interval options
or ) to select the time interval and press the ENTER key.
Cursor
Data box
Vector reference
Vector time
TRUE 05:00 <ARPA> No. 01
BRG 53.7°T RNG
CPA 1.65NM TCPA
ARPA target data
3. ARPA OPERATION
+
01
ARPA target
selected for
data display
ARPA target
02
Target no.
2.987NM CRS 350.4°
06:14
SOG 23.45KN
3-7