Tuning - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
1.6

Tuning

In default, the radar receiver can be tuned automatically after turning the radar to TX.
If you require fine tuning in manual, do the following:
1. Transmit the radar and select the maximum range with the RANGE key.
2. Press the MENU key to open the menu.
3. Use the Cursorpad (
4. Use the Cursorpad (
5. Use the Cursorpad (
6. Use the Cursorpad (
The window shown below appears.
7. Use the Cursorpad (
the tuning while you look the tuning
bar at the upper-right corner of the dis-
play. The best tuning point is where
the tuning bar moves to maximum value. The vertical bar on the tuning bar shows
the tuning voltage.
8. Press the ENTER key.
9. Press the MENU key to close the menu.
Note: If the automatic tuning does not give the correct tuning, run the [Tuning Init Ad-
just] again.
1-6
www.busse-yachtshop.de | info@busse-yachtshop.de
or ) to select [Tuning] and press the ENTER key.
Tuning menu
or ) to select [Tuning Mode] and press the ENTER key.
Tuning Mode options
or ) to select [Manual] and press the ENTER key.
or ) to select [Manual Tuning] and press the ENTER key.
Manual Tuning setting window
or ) to adjust
TUNE MAN Tuning method (Manual)
Tuning bar
Vertical bar