Furuno 1835 Operator's Manual page 18

2. Use the Cursorpad (
in the Menu column indicates the menu currently selected. The menu items in the
right window change according to the menu selected.
Menu description
[Brill/Color]: Adjust the brilliance and color.
[DIsplay]: Set up the display-related features.
[Echo]: Adjust the echo feature.
[Custom 1] - [Custom 3]: Customize the user settings.
[Alarm]: Set up the alarm items.
[Target Trails]: Process trails of the radar targets.
[Tuning]: Adjust the radar tuning.
[Others]: Set up other items.
[Target]: Set up the targets configuration.
[ARPA]: Set up ARPA targets.
[AIS]: Set up AIS targets.
[GPS]: Set up GP-320B (Black-Box GPS).
[System]
[Initial]: Initial settings.
[Tests]: System diagnostic and LCD test.
[Sector Blanks]: Set up the sector blanks to prevent the transmission in a cer-
tain area.
[Units]: Set up units.
[Installation] and [Factory]: For use by the installer. See the Installation Man-
ual.
3. Press the ENTER key to switch the control to the menu items column. The cursor
in the menu column now turns gray and the cursor in the menu items column is
yellow. The control moves to the menu items column.
To switch the control from the menu items column to the menu column, use the
CANCEL/HL OFF key. The color of the title bar of the active column is blue and
of the inactive column is gray.
4. Use the Cursorpad (
window with options for the related menu item appears.
Display Color options
5. Use the Cursorpad (
6. Press the ENTER key to save your selection. To close the window without saving,
press the CANCEL/HL OFF key (instead of the ENTER key).
7. Press the MENU key to close the menu.
Note: The menus on the [IEC] and [Russian-River] types close automatically when
there is no menu operation for 10 seconds, according to IEC regulations. The following
menus and screens are excluded from this regulation:
Alarm message, Alarm status, Tuning Init Adjust, GPS self test, GPS satellite
monitor, System self test, System LCD pattern, and Auto installation setup.
The menus do not close automatically in the [River] or [Sea] configuration.
www.busse-yachtshop.de | info@busse-yachtshop.de
or ) to select a menu or a sub menu. The cursor (yellow)
) to select a menu item and press the ENTER key. A
or
Echo Brill setting window
Example windows
or ) to select an option or numeric value.
1. DESCRIPTION OF OPERATION
1-5