Echo Area - Furuno 1835 Operator's Manual

1. DESCRIPTION OF OPERATION
Alarm category
AIS SYSTEM*
TX
ANT
CH1
CH2
CH70
FAIL
MKD
EPFS
L/L
SOG
COG
HDG
ROT
OTHER*
OVER_TEMP
*: Have a qualified technician check the equipment.
1.40

Echo Area

You can select the display area from [Normal] or [Full Screen].
1. Press the MENU key to open the menu.
2. Use the Cursorpad (
1-48
www.busse-yachtshop.de | info@busse-yachtshop.de
TX stopped or TX error
Antenna VSWR problem
TDM2 RX1 board problem
TDM2 RX2 board problem
RX channel 70 problem
System failure
Minimum input device lost
Navigator (GPS, etc.) problem
Position data lost
Speed data lost
Course data lost
Heading data lost
Rate of turn data lost
The temperature of the equipment is more than the spec-
ified value.
Area in which echoes are displayed
Normal
Echo area
or ) to select [Display] and press the ENTER key.
Meaning
Full Screen