Function Setting Mode (1*) - Toshiba e-STUDIO163 Service Handbook

2.2.6

Function Setting Mode (1*)

The function tables can be set in the function setting mode (1*).
Each function table consists of 8 bits, and each bit is assigned to one function. To set a function,
place a 0 or 1 in the bit which enables the function you want to set.
<Operation procedure>
FUNC type
[1][*]
[POWER] [Digital keys]
Displaying
bit-7, -6
Correct
[0] or [1]
Notes:
• Place a 0 or 1 in the bit you want to set in the function table.
• Press the [CLEAR] button in the middle of the setting to return to the initial screen.
100
101
102
Code Bit Default
7 0
6 1
5 0
4 0
18
3 1
2 0
1 0
0 0
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[START]
Displaying
[200%]
bit-5, -4, -3
Correct
[0] or [1]
FUNC Type
FUNC
PCFUNC
HOME
FUNC (100)
Items
Undefined -
Undefined -
Undefined -
Undefined -
Undefined -
Department Code 0: No
setting 1: Yes
Undefined -
Undefined -
2 - 15
Code
[START]
[Digital keys]
[200%]
Stores
value in RAM
[INTERRUPT]
Contents
-
-
-
-
-
This bit setting determines whether or not the
department control function is available.
-
-
ERROR CODE AND SELF-DIAGNOSTIC MODE
[FUNCTION
CLEAR]
Displaying
bit-2, -1, -0
Correct
[0] or [1]
[POWER]
OFF/ON
e-STUDIO163/166/203/206
2