Toshiba e-STUDIO163 Service Handbook page 34

Confirming and changing of the access code counter value
Auto search
[INTERRUPT]
[8][START]
[POWER]
Displaying
[Digital keys]
Notes:
• A counter value is separated as follows: 1 000 280 070, and is displayed from the high-order
position. Press the reproduction ratio button ([200%] or [25%]) to shift the counter value dis-
play to the 3 digits of the next lower/higher order.
• Change of the counter value can be registered only after the [START] button is pressed. If the
[CLEAR] button is pressed before the registration is completed, the changed value is also
canceled.
• Only the total counter value for each access code can be confirmed.
<Operation procedure>
Follow the procedure bellow to key in an access code when the access code mode is set.
"Displays the access
code mode"
[POWER]
*: Apply the same procedure when the equipment enters the interruption mode.
e-STUDIO163/166/203/206
ERROR CODE AND SELF-DIAGNOSTIC MODE
Access code
Access code
[Digital keys]
Displays
higher digits
[200%]
3 digits
Displays
lower digits
[25%]
Correct
Key in access code
[Digital keys]
Confirm
[200%]
higher digits
Displaying
3 digits
lower digits
Correct
[Digital keys]
Confirm
[25%]
When an access code
which has already been
"Displays number of copies"
[START]
When an access code
Cancel
which has not been
registered previously
[CLEAR]
is entered
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 14
06/04
Displays
[200%]
Displaying
3 digits
Displays
[25%]
Correct
[Digital keys]
Stores
value in RAM
[START]
registered is entered
operation
[POWER]
OFF/ON
Normal