Adjustment Of The Paper Feeding System - Toshiba e-STUDIO163 Service Handbook

3.8

Adjustment of the Paper Feeding System

3.8.1 Sheet sideways deviation caused by paper feeding
<Procedure>
The center of the printed image shifts to the front
side. Æ Move the guide to the front side (Arrow
(A) direction in the lower figure).
Feeding direction
Fig. 3-28
1) Loosen the screen.
2) Move the entire guide to the front or rear side.
3) Tighten the screw.
(A)
Fig. 3-30
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[Rear]
Center
[Front]
(B)
3 - 41
The center of the printed image shifts to the rear
side. Æ Move the guide to the rear side (Arrow
(B) direction in the lower figure).
[Rear]
Feeding direction
[Front]
Fig. 3-29
Center
e-STUDIO163/166/203/206
ADJUSTMENT
3