Cleaning; Cleaning The Surfaces; Cleaning The Microphone Windscreen - AKG AV100 Manual

Cleaning

7 Cleaning

Cleaning the surfaces

Use a soft cloth moistened with water to clean the plastic parts of the headset. Make sure no water enters
any opening of the headset!
Cleaning the microphone
1)
windscreen
2)
24
Damage of device!
Water damage because of water inside the device.
Never immerse the device in water or any other liquid.
Never clean the device under running water.
ATTENTION
Make sure that no water gets into the housing.
Damage of device!
Damaged surface because of aggressive cleaning agents.
Do not use any aggressive cleaning agents, brushes with metal or nylon bristles, or
sharp or metallic cleaning objects such as knives, hard scrapers or similar.
ATTENTION
Remove the windscreen foam. To remove the
windscreen hold the foam tightly with two
fingers so you actually pull on the plastic holder
underneath. The foam and its plastic holder will
come off.
Rinse it with water and then air dry the
windscreen.
Make sure the windscreen is completely dry before reattachment.
Figure 10: Remove windscreen foam
Aviation Headset AV100