Installation And Connection; Attaching The Microphone - AKG AV100 Manual

6 Installation and Connection

Attaching the microphone

The AV100 is shipped with the microphone attached to the left earcup.
You can attach the microphone on the other earcup:
1)
2)
3)
4)
5)
6)
Aviation Headset AV100
Disconnect the AV100 from the aircraft and
take out the batteries.
Unscrew the four screws with a Philips PH1
screwdriver (not supplied with the AV100) from
both earcups.
Carefully disconnect the microphone and
mount from the connector pins.
Make sure that you don't touch the connector
pins.
Connect microphone and mount on the other
side.
Screw on the microphone and mount.
If you do not attach microphone and mount, the headset will not work!
Leaving one side open will affect the functionality.
NOTE
Installation and Connection
Figure 9: Unscrew the microphone and mount
23