Changing The Mono / Stereo Mode; Intelligent Power Management; Using Aux Input - AKG AV100 Manual

Operation
Changing the MONO / Use the slide switch (14) to switch between the MONO ( ) or STEREO ( ) mode.
STEREO Mode
If you hear the intercom only one side, select the MONO mode.
If the aircraft has a stereo intercom, select the STEREO mode.
Intelligent Power The Intelligent Power Management detects when the AV100 is connected to your (powered) aircraft panel
Management and powers up automatically. When you unplug the AV100 or power down your aircraft panel the AV100 will
power down after several minutes to preserve battery power.
Note about Intelligent Power Management:
 When the headset is running on battery power only and is not plugged into an intercom, it will shut down
 If you are on a phone call please don't unplug the AV100 from the aircraft panel, or you will not be able

Using AUX input

Connect the AV100 with an external audio device or a portable GPS over the 1/8" AUX input (10).
Use the adapter cable to connect both devices.
16
even when there is an auxiliary or Bluetooth input present.
to complete your call as the microphone will not work (even with batteries).
 Plug one end of the cable into the headphone jack on the external device and the other end in the
AUX input.
 Raise the audio output volume of the connected device to min. 80%.
 Use the Bluetooth / AUX volume control (8) to achieve the desired volume.
None of the functions of a connected external audio device are controlled by the
Control module.
When a Bluetooth audio signal is detected, the AUX audio is muted!
NOTE
Aviation Headset AV100