Setting Up; Inserting/Replacing The Batteries In Control Module - AKG AV100 Manual

Setting Up

4 Setting Up
Inserting/replacing the
batteries in Control
module
1)
2)
3)
12
Batteries are only needed if you use the 6-pin (LEMO) connector to dual (GA) plug
adapter.
NOTE
Open and remove the battery cover (12).
Insert two AA batteries into the battery
compartment to conform with the polarity
marks (+/-).
If the batteries are inserted incorrectly, the
device will not work.
Close the battery cover.
This product is built for use with regular disposable batteries. Reachable batteries
or Lithium Batteries may be used but may influence the correct function of the low
power indication. Please note that rechargeable batteries cannot be charged in the
AV100 control module.
NOTE
Figure 3: Inserting batteries
Aviation Headset AV100