Bluetooth; Using The Headset Bluetooth Function; Activating Bluetooth - AKG AV100 Manual

Operation

Bluetooth

Activating Bluetooth

Using the headset
Bluetooth function
1)
2)
3)
4)
5)
6)
If the pairing is not successful, repeat steps 1 to 6.
18
Audible voice prompts will help you to establish the connections. To hear them
please make sure the Left volume control (3) and/or right volume control (4) are set
to a decent level and the Source priority slide switch (13) is set to AUTO or MIX.
NOTE
Press the Power button (5) and turn on the AV100.
Press the Bluetooth button (7) to activate the Bluetooth function. The LED will flash blue (for details see
blink pattern table at the end of this section). If your phone was paired to this AV100 before the
connection will establish automatically. In this case disregard the following steps 3) to 5)
Make sure Bluetooth is activated on your mobile phone (You may need to check the phones owner's
manual to do that).
Press the Bluetooth button (7) long to enter the pairing mode.
If the AV100 appears in the list of devices on your phone, select and confirm it. If a key is required,
enter the digits "0000".
As soon as the connection is established you are ready to use your AV100 as Bluetooth headset.
Please be aware that for full functionality the AV100 must always be plugged into the (powered) aircraft
panel!
The AV100 will automatically exit pairing mode after five minutes of inactivity.
NOTE
Aviation Headset AV100