Operation; Switching On The Av100; Volume Control - AKG AV100 Manual

5 Operation

Press the Power button (5) to switch on the AV100.

Switching on the AV100

Observe the Power LED:

Volume control

Adjust the volume level with the two volume control wheels (3, 4).
Aviation Headset AV100
The batteries are only in use when the AV100 is connected via the GA dual plugs.
The 6-pin LEMO plug provides enough power for the AV100. Please note that
without batteries the AV100 will power down with your aircraft panel immediately.
NOTE
 The LED flashes green, Power is ON and batteries are good.
 The LED flashes red (or blue / red if Bluetooth is on), Power is ON but the batteries have reached
the end of their capacity. Please replace them with new batteries as soon as possible.
 The LED is OFF, Power is OFF or batteries are depleted. Replace them with new batteries as soon
as possible.
Danger of hearing damage!
Exposure to loud sounds may cause hearing damage!
Avoid setting the volume levels too high.
WARNING
 Use the left wheel (3) to adjust volume of the left earcup.
 Use the right wheel (4) to adjust volume of the right earcup.
 Use the Bluetooth / AUX volume control (8) for loudness of your Bluetooth / AUX signal. Please
notice that the two volume wheels function as "master volume" so they must always be turned on
to some degree to hear Bluetooth or AUX signals.
Operation
15