Lexmark W812 Service Manual page 38

4022-XXX
Guide End - Adjusts forward and backward to fit to different paper sizes. These
components hold paper at the specified positions forward and backward respectively.
The size of paper in the cassette must be transmitted to the printer control unit as a set
value by the dial paper size.
Plate Lift L Plate Lift R - Mounted at the end of the cassette, the plate lifts are pushed up
when the cassette is inserted into the printer.
Lift Plate - The force for pushing up the lift plate is supplied by the springs connected to
the plate lift. Pushing up the lift plate assures the contact between the supplied paper and
pick rolls.
Separator Pad - Applies the friction force to the lower side of paper preventing multiple
sheets from being picked simultaneously by the pick roll. This component is to be
replaced each 100,000 sheets.
Guide Paper L
Front
Front
1-18
Service Manual
Lift Plate
Plate Lift L
Guide End
Paper Tray/Cassette
Assembly
Separator Pad
Plate Lift
Lift Plate L and R
Plate Lift R
Guide Paper R